JBL On Stage III WM Manuel du propriétaire Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 8
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
7
Navigation Control Mode
Turn “Walkman” on: Press the Play/Pause button on the remote control to wake the
Walkman”.
Folder + Press the Folder + button.
Folder Press the Folder button.
troubleshooting your jbl on stage III WM
English
Technical Specications
Symptom Possible Problem Solution
Troubleshooting
Frequency Response:
70Hz – 20kHz
Power Consumption:
20W Maximum
Power Input:
12V/1.5A
JBL On Stage III WM Transducer:
(4)1
(25mm)full range per channel
Dimensions:
Diameter – 7 1/2
(190mm)
Height – 2
(51mm)
System Weight:
1.12 lb (0.51kg)
Battery:
Size – AA
Type – Alkaline, NiMh
DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND
PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE
WHILE IN JBL ON STAGE III WM.
CAUTION: RISK OF EXPLOSION
OF BAT-TERY IF REPLACED WITH
AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
No sound from the JBL
On Stage III WM speaker
system
No power to the system or power
supply is not inserted correctly
Ensure that the power supply is connected to a live power
source and properly connected to the JBL On Stage III WM.
Note: When the JBL On Stage III WM is powered, a green
power LED on the top of the system will illuminate.
The volume may be set too low Touch the volume “Up” (+) button to increase system
volume level. Note: See the Easy Setup guides for an
overview of volume and other system functions.
Issue with auxiliary audio source Make sure an auxiliary cable is properly connected to
a known reliable source. Test the audio source with
headphones. Turn up the volume of the source.
Issue with iPhone/iPod source Make sure that the iPhone/iPod is properly docked. Make
sure iPhone/iPod is not paused; press the Play button on
the iPhone/iPod or remote control. Try connecting your
iPhone/iPod from it’s heaphone jack.
Low or drained batteries Replace the batteries. The green power LED will change
to red when batteries need to be replaced.
If you have any questions or need further assistance, please visit www.jbl.com.
Features, specications and appearance are subject to change without notice
Vue de la page 5
1 2 3 4 5 6 7 8

Commentaires sur ces manuels

Pas de commentaire